WT-3015S · sheet machine
WT-3015S Compact Sheet Metal Laser Cutting Machine, Fully Enclosed
The WT-3015S is a compact, fully enclosed laser cutting machine for sheets up to 1550 × 3050 mm that fits into a 20HQ container without being dismantled.
Overview
The WT-3015S is a compact, fully enclosed sheet metal laser cutting machine with a working format of 1550 × 3050 mm, offered from 3,000 to 12,000 W. Our website says it fits into a 20HQ container without being dismantled. That's the point of the S.
It shares its bed with the open WT-1530, so choosing between the two has nothing to do with sheet size. It's about layout. The WT-3015S closes the cutting area in and pulls its single table out for loading; there's no second platform. Shipping to a site with a tight delivery route? Or you just prefer a closed cutting area in the smaller format? Then start here.
Some shops pick the open frame because they like easy access to the table. Others pick the enclosed machine because they want the cutting area shut. Both are reasonable choices, and neither changes the format. Can't decide? Send us your largest sheet and a rough sketch of the floor, and we'll compare the two for your case in the quotation.
Specifications
- Working format
- 1550 × 3050 mmSame bed as the WT-1530. Nominal value from our website.
- Laser power range
- 3,000–12,000 WFixed in the quotation for the configuration you order.
- Cutting area
- Fully enclosedCabinet around the cutting area.
- Table
- One table, pulled out for loadingNo second platform.
- Shipping
- 20HQ containerStated to fit without dismantling; we confirm it for your route in the quotation.
Website parameter table
- Model in website table
- WT3015S
- Working size
- 1550 × 3050 mm
- X / Y / Z travel
- 1550 mm / 3000 mm / 300 mm
- X/Y position accuracy
- ±0.05 mm
- Z position accuracy
- ±0.008 mm
- X/Y repositioning accuracy
- ±0.03 mm
- Maximum no-load running speed
- 120 m/min
- Processing panel thickness (website table)
- 18 mm max
- X/Y maximum acceleration
- 1 G
- Table maximum load
- 1 T
- Cooling
- Water cooling
- Power demand
- 380 V, 100 A, 50 Hz
- Outer size L × W × H
- 5300 × 2600 × 2100 mm
- Machine weight
- 7.5 T
- Laser in table configuration
- Raycus 6000 W
- Cutting head
- BOCI BLT, auto focus
- Control system
- CYPCUT, BCS100 height follow
- Servo motor
- Fuji (Japan)
- Guide rail
- HIWIN (Taiwan)
- Chiller
- Hanli / S&A
Parameters from the WISECUT website parameter table (template values; to be replaced by the official model table). Final specification is confirmed in the quotation.
Features
- Fully enclosed cutting area in the 1550 × 3050 mm format.
- A single table that pulls out for loading.
- Designed to go into a 20HQ container without being taken apart, according to our website.
- 3,000 W up to 12,000 W.
Where it is used
- Shops that cut sheet up to 1550 × 3050 mm and want the cutting area closed in.
- Export orders where a machine that travels in one piece makes shipping and commissioning simpler.
- Workshops short of floor space, where the compact design is a reason to prefer it over a larger enclosed machine.
- Anyone weighing a closed cabinet against an open frame. A buyer's guide points out that larger working areas need a bigger frame, motion system and enclosure, which is why the enclosure belongs in the price talk. See Durma's buyer's guide.
Check before you order
- Single worktable that pulls out for loading; there is no second platform.
- Same format as the WT-1530: the difference is the enclosed, space-saving design.
- Power range is 3–12 kW.
FAQ
What is the difference between the WT-3015S and the WT-1530?
Same sheets, up to 1550 × 3050 mm, and the same start at 3,000 W. The WT-3015S is fully enclosed and built to travel in a 20HQ container; the WT-1530 is an open frame. The WT-1530 page covers the open layout.
Does the WT-3015S have an exchange table?
No. One table, pulled out for loading. For two platforms look at the WT-4020, which has a larger bed.
Will it really ship without being dismantled?
Our website states that it fits into a 20HQ container without dismantling. Access at your end is a separate question, so give us the route and the door sizes and we'll check it with you in the quotation.
Which sheets are too big for it?
Anything longer than 3050 mm or wider than 1550 mm. The bed size guide has a checker where you can type in your own sheet.
Can I add automatic loading?
Our automatic loading and unloading system is described on the auto feeder page. Whether it can be combined with this particular machine is not something we state here; ask us, with your sheets and layout, and the answer goes into the quotation.
Where it sits in the range
Highlighted: the working format of the WT-3015S.
Tell us your sheets
Send sheet size, material, thickness and the parts you cut. We reply with a suitable model and a quotation.