WISECUT · BEIJING WISECUT LTD
Sheet Metal Laser Cutting Machine Supplier
Start from your sheet. Tell us how big your largest sheet is and how much power you expect to need, and the five WISECUT sheet machines sort themselves into those that fit and those that do not.
Four questions, five machines
Answer what you know. Machines that do not fit are dimmed, with the reason. Nothing is sent anywhere.
Without JavaScript all five machines are listed below.
- WT-1530Open single platform1550 × 3050 mm · 3,000–12,000 W
- WT-4020Open exchange table2050 × 4050 mm · 3,000–12,000 W
- WT-6025Fully enclosed exchange table2550 × 6050 mm · 6,000–30,000 W
- WT-3015SSpace-saving fully enclosed1550 × 3050 mm · 3,000–12,000 W
- WT-12025Large-format fully enclosed2550 × 12050 mm · 6,000–30,000 W
Format is the machine working area. Leave margin for clamping and confirm your exact sheet in the quote. Cut thickness depends on material and configuration and is confirmed in the quotation.
Size, then power, then layout
- Format
The working format decides which sheets go on the machine at all. It is the one number you cannot work around later.
Bed size guide - Power
The 1530, 4020 and 3015S classes are offered from 3,000 to 12,000 W. The 6025 and 12025 go from 6,000 to 30,000 W.
How to choose - Layout
Open or fully enclosed, one table or an exchange table, and whether sheets are loaded by hand or by a system.
Auto feeder
Five layouts you will meet on the quote
Click a drawing to open that model.
Solid rectangles are the cutting area, thick outlines are an enclosure, dashed rectangles are a second platform or a pull-out table, and the amber marker is the cutting head.
How the formats compare
Four formats, five machines: the WT-1530 and the WT-3015S share one format and differ in layout. The WT-6025 and the WT-12025 share the 2550 mm short side and differ in length.
Four things that are easy to mix up
- “3–12 kW” read as one machine.It is a range the machine class is offered in. Power, laser source and configuration are fixed in the quotation.
- An exchange table read as automation.An exchange table is a second platform. Automatic loading and unloading is a separate system with a gantry loader and an exchange cart.
- Working format read as sheet size.The format is the machine working area. Leave margin for clamping, and give us your real sheet.
- One thickness figure read as a promise.Cut thickness depends on material, power and configuration, so we confirm it in the quote rather than print one number per model.
Where this range stops
This range is for
- Flat sheet and plate cutting
- Working formats from 1550 × 3050 mm to 2550 × 12050 mm
- Open and fully enclosed layouts
- Optional automatic loading and unloading
Not covered on this site
- Tube and profile cutting machines
- Handheld welding and cleaning machines
- Cut thickness and speed tables: these depend on configuration and are confirmed in the quote
Cut your own part first
We offer free proofing on request: send a drawing, the material and its thickness, and we cut your part. You judge the edge and the fit before you choose a machine.
Documents and show floor
The ISET document is issued to BEIJING WISECUT LTD for a series of fiber laser cutting machines. It is a voluntary documentation review, and a list of WT models is printed on it. Read its scope and limits.
We showed machines at METALTECH & autoMEX 2026 in Kuala Lumpur, Hall L1, Booth 4320.
BEIJING WISECUT LTD was established in 1996 (30 years (1996–2026)) and runs a 60,000 m² factory with 100+ staff.
Tell us your sheets
Send sheet size, material, thickness and the parts you cut. We reply with a suitable model and a quotation.