WT-1530 · sheet machine
WT-1530 Sheet Metal Laser Cutter, Open Single Platform
The WT-1530 is an open-frame laser cutting machine with one worktable for sheets up to 1550 × 3050 mm.
Overview
The WT-1530 is an open-frame sheet metal laser cutting machine: one worktable, a working format of 1550 × 3050 mm, and a power range from 3,000 to 12,000 W. Start low, and if the work gets heavier you can stay in the same machine class.
Open frame means nothing closes in the cutting area. You walk up to the table, put the sheet down, press go. That's easy, and it also means guarding and fume extraction are yours to plan, because the machine doesn't do it for you. The 1530 in the name is the bed: 1550 × 3050 mm. Got a standard sheet that size? Then this is the most direct layout we offer. One table. No second platform to keep fed.
We describe every model on this site the same way. Format, power range and layout are stated. Whatever shifts with configuration is settled in the quotation, so you never compare a number here with a different number from a datasheet written for another build.
Specifications
- Working format
- 1550 × 3050 mmShort side first. Nominal value from our website.
- Laser power range
- 3,000–12,000 WFixed in the quotation for the configuration you order.
- Cutting area
- Open frameNo enclosure around the cutting area.
- Table
- One worktableNo exchange table. The WT-4020 has a second platform.
- Cutting thickness and speed
- Set in the quotationNot printed here. It moves with material, power and configuration.
Website parameter table
- Model in website table
- WT3015
- Working size
- 1550 × 3050 mm
- X / Y / Z travel
- 1550 mm / 3000 mm / 300 mm
- X/Y position accuracy
- ±0.05 mm
- Z position accuracy
- ±0.008 mm
- X/Y repositioning accuracy
- ±0.03 mm
- Maximum no-load running speed
- 120 m/min
- Processing panel thickness (website table)
- 18 mm max
- X/Y maximum acceleration
- 1 G
- Table maximum load
- 1 T
- Cooling
- Water cooling
- Power demand
- 380 V, 100 A, 50 Hz
- Outer size L × W × H
- 5300 × 2600 × 2100 mm
- Machine weight
- 7.5 T
- Laser in table configuration
- Raycus 3000 W
- Cutting head
- BOCI BLT, auto focus
- Control system
- CYPCUT, BCS100 height follow
- Servo motor
- Fuji (Japan)
- Guide rail
- HIWIN (Taiwan)
- Chiller
- Hanli / S&A
Parameters from the WISECUT website parameter table (template values; to be replaced by the official model table). Final specification is confirmed in the quotation.
Features
- One worktable. Load, cut, unload, repeat.
- Open frame, so the operator reaches the table straight from the floor.
- Power from 3,000 W up to 12,000 W in the same machine class.
- A 1550 × 3050 mm bed, the same format as the enclosed WT-3015S.
Where it is used
- Sheets that arrive at 1550 × 3050 mm or smaller. Anything longer than 3050 mm simply won't lie on this bed, however cleverly you nest it.
- Shops that run longer batches and change material now and then, where unloading and reloading is a small slice of the day.
- Workshops with room for open-frame guarding and an extraction plan, and a floor that can carry this class of machine.
- Buyers weighing one table against two. A neutral buyer's guide puts the trade-off plainly: the beam stops during loading and unloading. It is a short read at Durma's buyer's guide, and the arithmetic afterwards is on you.
Check before you order
- Loading is done onto the single table, so ask how your sheet handling works at this size.
- Open frame: check how your workshop manages fume extraction and guarding.
- Need a second platform? The WT-4020 adds an exchange table in a larger format.
FAQ
What sheet size fits the WT-1530?
The working format is 1550 × 3050 mm. Measure your biggest sheet, short side first, and leave room for clamping and nesting. The bed size guide draws all five formats to one scale, so you can see the gap.
Does the WT-1530 have an exchange table?
No, just one table. If a second platform matters, the WT-4020 and WT-6025 both have one, in bigger formats. And an exchange table isn't an automatic loader; the auto feeder page explains the difference.
How thick a sheet can it cut?
We don't print one thickness for it. The answer depends on the material, the power you pick and the configuration. Tell us what you cut and how thick, and we confirm it in the quotation. Or send a drawing and we cut a sample.
Is open frame a problem for my workshop?
Not by itself. It just means guarding and fume extraction are yours to plan, because nothing encloses the cutting area. If you'd rather have it closed in, the WT-3015S offers the same format with an enclosure. Describe your shop and we'll say which one fits.
Can I see a price?
We don't publish a list price. The price page shows what moves a quotation and what to send us.
Where it sits in the range
Highlighted: the working format of the WT-1530.
Tell us your sheets
Send sheet size, material, thickness and the parts you cut. We reply with a suitable model and a quotation.